Digital Stormer Viscometer SYTM-III
Standard: ASTM and GB9269-88
Introduction
The Digital Stormer Viscometer is used to measure the paint and to indicate the paint viscosity by KU value.
The viscometer adopts a single chip microcomputer, the operator can read the sample KU value from the equipment without checking form.
Working Principle
Soak the paddle rotor into the testing sample, Increase or decrease the weight to keep the paddle rotor speed around 200 rpm/min, then when it at 200 rpm/min, input the sample weight to get the viscosity KU value by the single microcomputer.
Parameters
| Voltage |
50HZ 200V , Leaf size: 54x7.9x0 8 |
| Container capacity |
about 50cml |
| Weight |
10kg |
| Dimension |
220x220x390(length x width x height) |
Stormer Viscometer
Standard:GB9269
Introduction
The Stormer Viscometer is to determine the viscocity of paints and other coating materials.
Consistence is defined as the loading gram needed by producing the specified shearing rate which is usually indicated by KU value.
The LCD screen can display the loading gram and KU value directly.
Standard:GB/T1723-93
Introduction
The Cup Viscometer is used for determination of visvosity of paint coatings with no less than 20 seconds.
Parameters
| Measuring Range |
50ml sample out of time no less than 20 seconds |
| Outflow Height |
14+0.02mm |
| Outlet Diameter |
5.6+0.02mm |
Audited Supplier 
){kind=link}
){kind=link}