The Laboratory Testing Equipment Film Pendulum Hardness Tester

• Customization: Available
• After-sales Service: 24/Hrs Reply
• Warranty: 1 Year
• Model NO.: SQBY SQBY-II
• Customized: Customized
• Structure: Portable
• Name: Hardness Tester
• Standard: Hg2-57-67
• Pendulum Length: 500mm
• Ball Diameter: 8mm
• Glass Value: 440+-6 Seconds
• Weight: 120g
• Transport Package: Carton Case
• Specification: SGS
• Trademark: SAMYON
• Origin: Cn
• HS Code: 903180
• Production Capacity: 100sets Per Month

Product Description

The film pendulum hardness tester 


Accoring to the HG2-57-67 standard design, used to test the hardness of the film,according to a certain weight and length of the pendulum rod by the fulcrum of the film on the swing-The hardness of the film was determined by the time of 5-2.

Using the ratio of the time required to stop the swing of the pendulum in the film, and the ratio of the time required to swing the pendulum to fie same amplitude on the glass plate.

Specifications:
The pendulum rod and its part weight is 120 grams
The swing rod from the stand point to the tip of the pendulum length 500mm.
Fulcrum ball diameter: 8mm.
The scale should be engraved on the scale of the zero moment between the scale, since the zero degree of the two ends of the scale of 5 degrees above.
Glass value: 440+-6 seconds

The film hardness(timing)


QYB-type pendulum rod type film hardness tester is a modified QYB type pendulum hardness tester.
Its main characteristic is to show the improvement of the horizontal mechanism; the scale can move horizontally, so it is easy to adjust;
Coupled with the photoelectric counter, therefore, fast ,accurate, save manpower. The design is follow GB1790-79.
So the test in paints, varnishes and related product sampling, testing, to determine the coating hardness of paints, varnishes and related products.
Technical indicators (a) Pendulum
Style: M-3
Glass value: 440S±16S (two) special counter
Power consumption: 4W
Total quality:120g±lg Count:352±4
Power: 50HZ 22V~
Counting range:  0-999

Impact Tester


Introduction

The Impact Tester is applicable to determine the paint film resistance to impact 
The equipment can comply with the standards of GB/T1732

Parameters
 

Height Of Impact	0-500mm, 0-100mm
Hammer Weight	1kg
Diameter of steel ball on the punch end	φ8
Instrument Weight	14kg