Concrete Strength Tester and Concrete Pull-out Tester

• After-sales Service: 24/Hrs Reply
• Warranty: 1 Year, 1 Year
• After-Sales Service: 24hours
• Allowed Maximum Pullout Power: 60 + 10% Kn
• Accuracy: 1.5% F.S (Sensor Error 0.5%)
• Work Rod Piston Stroke: 4 mm
• Model NO.: SAM-CPT
• Compressive Strength Range: 5 ~ 80 MPa
• Transport Package: Carton Case
• Specification: ISO
• Trademark: SAMYON
• Origin: Cn
• HS Code: 903180
• Production Capacity: 100sets Per Month

Product Description

Concrete Strength Tester and Concrete Pull-out Tester

Applicable scope:
Used to control the construction quality and schedule: to evaluate the influence of concrete transportation, pumping, pouring, compaction and maintenance to cover strength.
Decide the appropriate time to dismantle templates, to add load, and to do the hot and humid maintenance in the construction.
Test the concrete strength of all kinds of existing buildings under 80 Mpa, to evaluate compressive strength and determine the actual component strength.
 
Technical parameters:

Allowed maximum pullout power	60 + 10% kN
Accuracy	1.5% F.S (sensor error 0.5%)
Work environment temperature	-10ºC ~ 60ºC
Work cylinder piston effective area	25.13 cm2
Work rod piston stroke	4 mm
Compressive strength range	5 ~ 80 Mpa (cast-in-place method) 5 ~ 80 Mpa (post-install method)
Pullout tester display error	+/- 2% F.S
Weight	5kg
Driller and cutter speed	9500 r/min

Allowed maximum pullout power:  60 + 10% kN
Accuracy:   1.5% F.S (sensor error 0.5%)
Work environment temperature:  -10ºC ~ 60ºC
Work cylinder piston effective area: 25.13 cm2
Work rod piston stroke:  4 mm
Compressive strength range: 5 ~ 80 Mpa (cast-in-place method)
                                               5 ~ 80 Mpa (post-install method)
Pullout tester display error: +/- 2% F.S
Weight: 5kg
Driller and cutter speed:   9500 r/min


Applicable scope:
Used to control the construction quality and schedule: to evaluate the influence of concrete transportation, pumping, pouring, compaction and maintenance to cover strength.
Decide the appropriate time to dismantle templates, to add load, and to do the hot and humid maintenance in the construction.
Test the concrete strength of all kinds of existing buildings under 80 Mpa, to evaluate compressive strength and determine the actual component strength.
 
Technical parameters:
Allowed maximum pullout power:  60 + 10% kN
Accuracy:   1.5% F.S (sensor error 0.5%)
Work environment temperature:  -10ºC ~ 60ºC
Work cylinder piston effective area: 25.13 cm2
Work rod piston stroke:  4 mm
Compressive strength range: 5 ~ 80 Mpa (cast-in-place method)
5 ~ 80 Mpa (post-install method)
Pullout tester display error: +/- 2% F.S
Weight: 5kg
Driller and cutter speed:   9500 r/min